High Pressure Floor Cleaning Machine
Cold-water high pressure floor cleaning — built for factories, warehouses, and industrial facilities that need deep contamination removal without complex maintenance.
✅ Cold water, full industrial pressure
✅ Matched to your floor type and contamination load
✅ Factory-direct, export-ready
Industrial High Pressure Floor Cleaning Machine
Traditional floor scrubbers struggle with embedded oil, chemical residue, and hardened debris on industrial concrete — leaving contamination behind that creates safety risks and compliance failures. High pressure floor cleaning machine with cold-water cuts through surface buildup at the source, eliminating the need for harsh chemicals while delivering consistent results across large-scale factory and warehouse floors.
Not all pressure washers are built for industrial duty. Our machines deliver sustained high-flow output purpose-built for continuous shift operation — outperforming standard market units that throttle under prolonged load. Reinforced pump assemblies, industrial-grade hose fittings, and corrosion-resistant components ensure reliable performance across chemical plants, shipyards, and heavy manufacturing facilities worldwide. As shown in the video on the right, our high pressure floor cleaning machine delivers powerful performance and high efficiency.
Tell us your floor area, contamination type, and power supply — we’ll match you to the right machine and deliver a factory-direct quote within 24 hours.
High Pressure Floor Cleaning Machine for Sale
Industrial floor cleaning demands more than pressure — it demands the right pressure, matched to your surface type, contamination load, and operational cycle. Below are three factory-direct high pressure floor washer series, each engineered for a specific range of industrial applications. Whether you’re maintaining a chemical plant, food processing facility, or heavy manufacturing floor, there’s a configuration built for your workload.
Recommended Models: Industrial High Pressure Pipe Cleaning Machines
Core Advantages
- 300 Bar electric-driven output — powerful industrial cleaning without diesel exhaust indoors
- Built-in 150L water tank — operation where direct supply is unavailable
- Compact mobile frame — repositions across bays, aisles, or floor zones
Recommended Equipment 1：
| Model | JMT-23/300 |
|---|---|
| Operation Type | Mobile |
| Rate Pressure | 300 bar / 5000 psi |
| Water Flow Rate | 23 L/min |
| Water tank | Volume 150L |
| Plunger dia. | 18mm |
| Electric motor | 15kw, 3Phase, 380v/50Hz |
Core Applications
- Food processing and pharmaceutical plant floors requiring emission-free operation
- Automotive workshop floors with embedded oil and cutting fluid residue
- Indoor warehouse and logistics center concrete floor maintenance
Core Advantages
- 500 Bar / 57 L/min — high-pressure, high-flowflow output for large-area coverage
- 138 kW diesel engine — full off-grid capability for remote industrial sites
- 400L onboard tank — extended operation without supply interruption
Recommended Equipment 2：
| Model | JMT-57/500 |
|---|---|
| Operation Type | Mobile |
| Rate Pressure | 500 bar / 7200 psi |
| Water Flow Rate | 57 L/min |
| Water tank | Volume 400L |
| Plunger dia. | 26mm |
| Diesel Engine | 138 kw |
Core Applications
- Shipyard workshop floors and outdoor deck surfaces with heavy grease accumulation
- Petrochemical plant floors requiring deep-penetration contamination removal
- Port facility yards and large-scale loading dock washdown operations
Core Advantages
- 1,200 Bar ultra-high pressure — removes hardened scale, coatings, and bonded industrial residue
- 50-metre hose — covers expansive floor areas from a single fixed machine position
- 238 kW diesel engine — sustained heavy-duty output for demanding continuous operations
Recommended Equipment 3：
| Model | JMT-5-30/1200 |
|---|---|
| Operation Type | Fixed |
| Rate Pressure | 1200 bar / 17400 psi |
| Water Flow Rate | 30 L/min |
| High pressure hose | 50 meters |
| Plunger dia. | 20mm |
| Diesel Engine | 238kw |
Core Applications
- Pre-coating surface preparation on steel and concrete floors requiring bare-substrate standard
- Petrochemical and refinery floors with multi-layer contamination and compliance requirements
- Heavy industrial plant floors where standard pressure equipment has repeatedly underperformed
Not sure which equipment fits your project?
- Light-to-medium contamination / indoor concrete or epoxy floors → Recommended Equipment 1
- Heavy oil, grease, or chemical residue / continuous shift operation → Recommended Equipment 2
- Large-area indoor yards, loading docks, or shipyard floors → Recommended Equipment 3
Already know what you need? Request a full spec sheet and factory-direct price for your preferred equipment — or tell us your floor type and contamination load, and we’ll recommend the right configuration within one business day.
Why Choose Us as Your Industrial High Pressure Floor Cleaning Machine Supplier?
In an industry flooded with middle-men, we stand out as a high pressure washer for floor cleaning manufacturer in China that owns the entire process—from the initial CAD drawing to the final sea-freight container. The JMT-1 series cold water high-pressure washers for sale are available through multiple convenient channels to meet diverse customer needs. Buyers can choose factory direct sales without any difficulty.
Unlike a standard high pressure washer factory, we have achieved full vertical integration by manufacturing our own core components. This dual capability — as both a high-volume production hub for High Pressure Pipe Cleaning Machines and High Pressure Water Jet Cleaning Machines, and a precision-driven manufacturer — allows us to guarantee superior quality while significantly reducing procurement costs for our global partners.
Our Independent R&D Team
Brand Guarantee
Our status as a motor high-pressure washer factory ensures that every unit—from a 1400W high-pressure washer manufacturer specification to a high-power pressure washer manufacturer-grade motor—is built to industrial standards.
Heavy-Duty industrial systems
Our high-pressure washer factories feature multiple specialized assembly lines, enabling us to fulfill both large-scale orders and high-end customization requirements simultaneously.
Customization OEM
As a flexible high-pressure washer supplier, we offer extensive customization — from design to final assembly — ensuring every unit precisely meets your requirements.
Strict testing protocols
Every unit leaves our facility built to vehicle-manufacturer-grade standards, with high-pressure hoses rated at 2.5–3.5x working pressure.
After-sales arrival support
Warranty Policy
Warranty claims are straightforward: contact our after-sales team with a description and photo/video documentation, receive a diagnosis and resolution proposal within 48 hours. Extended warranty and priority response are available for bulk orders — contact us to discuss.
Technical Support
- Pre-purchase: Free engineering consultation on specifications and custom solutions for non-standard applications.
- Production: Regular updates and third-party inspection support for bulk orders.
- Post-delivery: Remote diagnosis via video/photo, multilingual manuals, video training, and 24-hour inquiry response.
Spare Parts Supply
We stock all primary wear parts (standard orders ship within 3 days, expedited available), include a 12–18‑month parts list at no extra freight, and guarantee 8‑year parts availability — because for international buyers, idle machines waiting for components mean direct production loss.
Our Certifications
Our Global Export & Logistics Capabilities
Pre-shipment inspection & testing
Before any high pressure floor washer leaves our facility, it undergoes a 100% QC check. We test the pump’s pressure stability, engine thermal limits, and safety valve triggers. A “QC Passed” certificate and a detailed testing video are provided to the client for peace of mind.
Logistics & export documentation
- Bills of Lading (B/L)
- Commercial Invoices & Packing Lists
- Certificates of Origin (CO)
- Compliance Certificates (CE/EPA/UL)
Direct factory advantage
We offer direct factory-to-customer shipping. This means you source directly from our high-pressure washer factories, bypassing all intermediaries and ensuring the fastest possible lead times
High Pressure Floor Cleaning Machine Technical Parameters and Performance
Selecting the right high pressure washer floor cleaner starts with understanding the specifications that actually determine field performance. Pressure ratings and flow numbers on a datasheet only tell part of the story — what matters is how those parameters translate to real cleaning outcomes on your specific floor type and contamination level. Here’s what to evaluate before committing to a water pressure machine for floor cleaning.
Pressure Range — 200 to 1200bar
Pressure determines how effectively the water jet dislodges bonded contamination from concrete pores, joints, and surface coatings.
- 200–250 Bar — general maintenance on concrete or epoxy floors; dust, loose debris, moderate grime
- 250–400 Bar — embedded oil, chemical deposits, hardened production residue on heavily used surfaces
- 400–700 Bar — shipyard decks, petrochemical plant floors, heavy grease and bonded industrial residue
- 700–1,200 Bar — pre-coating surface preparation, paint and coating removal, bare-substrate restoration to inspection standard
Always match pressure to surface type — applying maximum output on sealed or coated floors risks delamination.
Flow Rate Range — 15 to 50 L/min
If pressure determines cleaning force, flow rate determines cleaning speed — critical in facilities where downtime costs are real.
- 15–25 L/min — enclosed bays and zones up to 2,000 m²; balanced water consumption and area coverage
- 0–50 L/min — logistics yards, port aprons, multi-bay manufacturing floors exceeding 2,000 m²
Always verify inlet water supply capacity; inadequate flow starves the pump and accelerates wear.
Power Source
- Electric — enclosed indoor environments; factories, food plants, warehouses; no exhaust, quieter, lower maintenance
- Gasoline — sites without reliable grid access; construction sites, remote yards, temporary operations
- Diesel — large-scale outdoor applications; shipyards, petrochemical exteriors, municipal facilities; highest sustained output
For Southeast Asia and Middle East export markets, diesel configurations are frequently the preferred specification given on-site infrastructure conditions.
Mobility & Hose Length 15 to 30m
- Wheeled trolley — standard for floors up to 500 m²; easy repositioning between zones
- Cart-mounted — consolidates pump, reel, and water supply for continuous coverage above 500 m²
- 15–20 m hose — suits centrally positioned machines in enclosed single-bay environments
- 20–30 m hose — warehouse aisles, dock areas, or floors with fixed machinery obstacles
Confirm hose pressure rating matches machine output — undersized hose is a common failure point on high-output units.
For specific values, please refer to the table below.
| Parameter | Light-Duty Industrial | Heavy-Duty Industrial | Extreme-Duty / Surface Prep |
|---|---|---|---|
| Pressure (Bar) | 200–250 Bar | 250–300 Bar | 300–400 Bar |
| Flow Rate (L/min) | 15–25 L/min | 25–35 L/min | 35–50 L/min |
| Power Source | Electric | Electric / Diesel | Diesel |
| Hose Length | 15–20 m | 20–25 m | 25–30 m |
| Mobility | Wheeled trolley | Cart-mounted | Cart-mounted / trailer |
Ready To Take The Next Step
Every specification covered in this section — pressure, flow rate, and hose length — directly impacts both what you pay and what you get back over the machine’s operational life. All models are now available for immediate order.
For bulk pricing and customization, please reach out to our sales team. Contact us today.
How to Choose High Pressure Floor Cleaning Machine
Choosing the right pressure washer machine for floor cleaning is less about picking the highest-spec unit and more about matching machine capability to your actual site conditions. Work through the four criteria below — each one narrows your configuration options and brings you closer to a machine that performs on day one without over-investing in capacity you won’t use.
Assess Your Floor Area and Layout
- Under 500 m² (workshop bay, vehicle pit, food processing room) — wheeled trolley unit with 15–20 m hose; full coverage from one or two positions
- 500–2,000 m² (mid-size warehouse, multi-bay production floor) — cart-mounted configuration with higher flow output to reduce repositioning
- Over 2,000 m² (logistics center, shipyard workshop, chemical plant) — trailer-mounted unit with extended hose reach and sustained high-flow capacity for full-area coverage without operator fatigue
Identify Your Contamination Type
Contamination type determines the pressure configuration required. Loose dust and general production debris clear at 200–250 bar without risking coating damage on sealed floors. Embedded oil, cutting fluid, and chemical spillage bonded to porous concrete requires 250–300 bar to break surface adhesion reliably. Hardened grease, paint overspray, rubber deposits, and pre-coating scale demand 300–400 bar with appropriate nozzle selection. Mismatching pressure to contamination type is the most common cause of unsatisfactory results with an otherwise capable machine.
Consider Power Availability On-Site
- Electric drive — indoor facilities with stable grid access; no exhaust, lower noise, suits daily schedules; three-phase supply required for 200 bar-plus units
- Diesel drive — outdoor yards, remote sites, port facilities, and off-grid export deployments where grid reliability cannot be assumed
- Mixed indoor/outdoor operations — diesel with ventilation planning eliminates the need for a second machine
Match Machine Class to Cleaning Frequency
Cleaning frequency determines the duty cycle your machine must sustain. Daily or shift-based operations require industrial-class pumps rated for continuous use with reinforced seals and serviceable components — light-commercial specifications show accelerated wear within months under this load. Weekly deep-cleaning cycles allow more flexibility in duty cycle rating. Periodic intensive cleaning — pre-audit restoration, post-construction washdown, or seasonal deep cleans — may justify a higher-pressure configuration even where day-to-day contamination is moderate.
Tell us your facility type, floor size, and main contamination — we’ll match you with the right machine model and provide a competitive FOB quote.
Hot Selling High Pressure Washer Models
The High-Pressure Hot Water Cleaner is a heavy-duty cleaning machine that delivers scalding hot water (up to 80–95°C / 176–203°F) combined with high-pressure jets (up to 100–200 bar) to blast away grease, oil, dirt, and tough stains.
Here are some hot selling models, and you can always contact us for a customized machines.
High Pressure Floor Cleaning Machine for Industrial Applications
No two industrial floors present the same cleaning challenge. Contamination type, surface coating, operational constraints, and compliance requirements vary significantly across sectors — and the right high pressure floor washer configuration for a food plant looks nothing like the right setup for a shipyard. The sections below break down the key cleaning demands by industry so you can identify where your facility fits and what performance spec that translates to.
Chemical & Petrochemical Plants
- Corrosion-resistant coatings must be preserved — pressure calibrated to flush deposits from pores and joints without damaging floor treatment
- Chemical residues bond aggressively to concrete substrates — requires sufficient penetration force to clear surface contamination reliably
- Scheduled turnaround windows demand high flow output alongside high pressure — large floor areas must be completed within fixed shutdown time
Food Processing & Beverage Factories
- Shift-by-shift cleaning across wet production zones, cold storage entries, and dispatch floors — fat, oil, food residue, and beverage spillage create both contamination risk and slip hazard
- High-pressure cold water eliminates chemical cleaning agents — reduces procurement cost and food product contamination risk from carry-over
- Chemical-free cleaning capability directly supports HACCP, BRC, and equivalent food safety audit compliance
Shipyards & Port Facilities
- Heavy grease, marine lubricant, paint overspray, and rubber abrasion deposits bond tenaciously to large-area outdoor concrete in salt-laden environments
- Coverage speed is as critical as pressure — port aprons and dry-dock floors extend across thousands of square metres, making flow rate and hose reach key performance factors
- Regular high pressure washdown removes salt residue that accelerates concrete structural degradation over time
Warehouses & Logistics Centers
- Forklift oil deposits, pallet drag marks, and hydraulic fluid leaks accumulate progressively — creating slip risk and increasingly resistant contamination layers if not cleared on a regular cycle
- High-frequency schedules favour mobile, easy-to-deploy configurations operable during shift changeovers or overnight windows without specialist setup
- Loading dock transition zones accumulate the heaviest soiling — targeted daily or every-other-day high-pressure washdown delivers the highest impact
Not sure which model fits your environment? Our technical team will match the right machine to your site — no obligation. We’ll provide a matched recommendation and factory-direct quotation within 24 hours.
Industrial High Pressure Floor Cleaning Machine Price & Cost
Industrial high pressure washer floor cleaner pricing is determined by operating pressure, drive type, flow output, and mobility configuration. This section covers the price ranges across machine classes, the variables that drive cost differences between specifications, and why factory-direct procurement consistently delivers better value than distributor or reseller sourcing.
Price ranges by machine class
Industrial high pressure floor cleaning machines are priced across three tiers based on operating pressure and configuration:
- 200–300 bar / electric drive / trolley or cart-mounted — entry-level industrial specification for indoor facilities with stable grid access. Price range: $3,500–$8,000 per unit depending on flow rate and hose length.
- 300–500 bar / electric or diesel / skid or cart-mounted — mid-range specification for demanding contamination types including hardened grease, paint overspray, and chemical residue on porous concrete. Price range: $8,000–$18,000.
- 500–700 bar / diesel / trailer-mounted with integrated water tank — high-output specification for large-area outdoor surfaces, port aprons, shipyard floors, and multi-site contractor deployment. Price range: $18,000–$35,000.
Custom configurations — extended hose assemblies, motorized reels, multi-gun outlets — are priced at quotation stage.
Variables that affect your quoted price
Four parameters drive the cost difference between machine classes
- Operating pressure — the primary cost driver. Pump assemblies rated for 500 bar-plus require tighter manufacturing tolerances and higher-grade valve and seal materials than mid-range units.
- Flow rate and drive sizing — higher flow output requires larger pump displacement and a more powerful drive unit. Diesel configurations carry higher unit costs than equivalent electric-drive machines due to engine and fuel system integration.
- Mobility configuration — trailer-mounted units with integrated water tanks, motorized hose reels, and instrument panels command higher prices than skid or trolley configurations of equivalent pump specification.
- Nozzle and accessory package — base pricing covers pump unit, hose, and standard nozzle set. Rotating heads, surface cleaners, and extension lances add to delivered cost. Specifying a complete accessory kit at purchase avoids higher unit prices on separate orders.
Factory-direct vs distributor pricing
Distributor and reseller sourcing typically adds 25–40% to the ex-factory unit price — covering dealer margin, regional warehousing, and intermediary handling. For buyers procuring a single unit, this premium is often invisible until a direct factory quotation is requested for comparison.
For contractors procuring multiple units, or facilities operating on multi-year maintenance budgets, the cumulative cost difference is material. Factory-direct procurement also provides direct access to engineering support for specification, configuration, and post-sale spare parts supply — without routing technical queries through a distributor with limited product knowledge.
We export directly to 40+ countries. There is no regional exclusivity that prevents direct purchasing.
Pricing is configuration-specific. Submit your floor area, contamination type, site power conditions, and required pressure range through our inquiry form — our engineering team will return a specified equipment proposal and factory-direct quotation within 24 hours.
Some Tips Before Buying an Industrial High Pressure Floor Cleaning Machine
Selecting the right floor cleaning system requires balancing raw power with operational logistics. To ensure long-term reliability and a high ROI, prioritize technical durability and site adaptability over basic retail specifications.
Pump Engineering & Duty Cycle Grade
The pump is the heart of the machine; its engineering grade determines its lifespan in heavy-duty environments.
- Low-Speed Triplex Pumps: Demand 1450 RPM motors for reduced heat, vibration, and significantly longer seal life.
- Solid Ceramic Plungers: Prioritize solid ceramic over coated versions to resist thermal shock and abrasive mineral wear.
- Forged Brass Manifolds: Ensure the pump head is forged brass to prevent high-pressure fatigue and corrosion.
- Continuous Duty Rating: Verify the machine can run 6–8 hours daily without overheating or pressure loss.
Invest in industrial-grade durability—contact us to learn more about our 1450 RPM low-speed pump technology.
Pressure & Flow Rate Synergy
Cleaning efficiency depends on the balance between stripping power (PSI) and rinsing volume (GPM).
- Surface-Specific PSI: Match pressure to floor type; 250 Bar is ideal for concrete, while lower is safer for epoxy.
- High-Flow Rinsing: Prioritize higher L/min to flush away loosened sludge and prevent dirty water re-settling.
- Adjustable Unloader Valves: Ensure stable pressure control to handle both deep-pore cleaning and delicate rinsing tasks.
- Cleaning Unit Efficiency: Higher GPM allows for larger surface cleaners, reducing total labor time by up to 40%.
Maximize your daily output—request a quote for a high-flow machine tailored to your surface area.
On-Site Logistics & Accessory Integration
The machine’s mobility and its ability to work with specialized tools define your daily operational speed.
- Heavy-Duty Wheeled Chassis: Balanced steel frames with pneumatic tires are critical for navigating cluttered industrial sites.
- Non-Marking Reinforced Hoses: Use steel-braided hoses that won’t leave black streaks on newly cleaned facility floors.
- Total Stop System (TSS): An essential safety feature that protects the pump from overheating during trigger-off intervals.
- Surface Cleaner Compatibility: Verify the machine supports rotary cleaners to ensure uniform, splash-free results on large areas.
Reach every corner with ease—get a customized hose and mobility kit for your facility today.
Our Industrial High Pressure Floor Cleaning Machine Applications & Real Cases Worldwide
Applications
Our industrial high pressure floor washers are deployed across the most demanding environments in global industry — where standard equipment fails and cleaning performance directly impacts compliance, safety, and operational continuity.
Municipal Road Floor Cleaning
Food Plant Grease Removal
Construction Site Road Cleaning
Factory Street Cleaning
Global Real Cases
From Southeast Asia to the Middle East and Europe, industrial facilities and infrastructure contractors worldwide rely on our machines to deliver consistent, large-scale pipeline cleaning results — factory-direct, configured for local conditions.
Case Study 1
Southeast Asia — Thailand Food Processing Factory | Production Floor Deep Cleaning
A food processing factory in Thailand needed an efficient solution to remove grease, food residues, and bacteria from large production floors while meeting strict hygiene standards. We supplied an industrial High Pressure Floor Cleaning Machine equipped with a rotary surface cleaner. The factory reduced cleaning time significantly, improved sanitation results, and reported more consistent compliance with food safety inspections.
Case Study 2
Middle East — United Arab Emirates Logistics Warehouse | Concrete Floor Maintenance
A logistics warehouse in the UAE required a reliable method to clean heavy tire marks, dust buildup, and oil stains from high-traffic concrete floors. We provided a High Pressure Floor Cleaning Machine with high-flow water output and a large-area surface cleaning attachment. The warehouse maintenance team achieved faster cleaning cycles, improved floor appearance, and extended the intervals between major maintenance operations.
Case Study 3
Europe — Germany Manufacturing Plant | Industrial Workshop Floor Cleaning
A manufacturing facility in Germany needed to remove metal dust, coolant residues, and industrial grime from workshop floors without disrupting daily operations. We supplied an electric High Pressure Floor Cleaning Machine designed for indoor industrial environments. The plant maintenance team reported improved cleaning efficiency, safer walking surfaces, and reduced labor requirements compared with their previous cleaning methods.
Whether you are searching for an Industrial high pressure floor cleaning machine India or a specialized unit in the Americas, our export infrastructure is built to support you.
. QUESTIONS
Common Questions
Which matters more — flow rate (LPM/GPM) or pressure (bar/PSI)?
Pressure determines penetration force. Flow rate determines coverage speed. Neither substitutes for the other — under-specifying either parameter compromises cleaning performance. Combined performance is measured as Cleaning Units (CU) = PSI × GPM — a more reliable indicator than pressure or flow rate alone.
What Types of Floors Can a High Pressure Floor Cleaning Machine Clean?
A High Pressure Floor Cleaning Machine is suitable for a wide range of hard surfaces, including concrete floors, epoxy-coated floors, ceramic tiles, stone surfaces, warehouse floors, factory workshops, parking garages, and outdoor pavements. When equipped with the correct surface cleaner attachment and pressure settings, it can remove dirt, grease, tire marks, and industrial residues without damaging the floor.
How Much Pressure Is Needed for Effective Floor Cleaning?
The required pressure depends on the floor material and the level of contamination. For light-duty cleaning, 100–150 bar (1,450–2,175 psi) is typically sufficient. Commercial and industrial floors often require 150–300 bar (2,175–4,350 psi) to remove grease, tire marks, and embedded dirt. For heavily soiled factory floors or outdoor concrete surfaces, higher-pressure systems combined with a surface cleaner attachment can deliver faster and more consistent cleaning results while reducing water splash and operator fatigue.
Can your machines be configured to work with our existing factory water supply conditions?
Inlet water compatibility:
- Standard inlet rated to 25°C; optional 50°C inlet configuration available
- Compatible with municipal supply, tank-fed systems, and remote site water sources
- Variable inlet pressure conditions assessed at inquiry stage — configuration recommended by engineering team
What is your minimum order quantity (MOQ), and do you support custom orders?
MOQ is 1 unit for standard configurations. OEM and custom orders — covering pressure, drive, mobility, hose, nozzle, and branding — are confirmed at quotation stage. Submit requirements for a factory quotation.
Do you supply spare parts, accessories, and protective gear?
Yes, absolutely. We are not just an assembly factory; we are a comprehensive high-pressure washer pump factory and accessories manufacturer.
What are your payment terms?
T/T, L/C, Trade Assurance(By Alibaba), Western Union.
Still have questions? Contact our engineers now.
Our Hot Selling High Pressure Machine
High-pressure cleaning machine
200 – 1500 Bar
High-pressure concrete roughening equipment
500 – 1500 Bar
High-pressure plunger water pump
200 – 1500 Bar
High-pressure sewer drain machine
200 – 500 Bar
High-pressure hot water cleaning machine
200 – 300 Bar
High-pressure grouting pump
500bar
Water jet cutting machine
350 – 3000 Bar
High-pressure test pump
50 – 750 Bar
High Pressure Floor Cleaning Machine
Cold-water high pressure floor cleaning — built for factories, warehouses, and industrial facilities that need deep contamination removal without complex maintenance.
✅ Cold water, full industrial pressure
✅ Matched to your floor type and contamination load
✅ Factory-direct, export-ready
